Thermoplastic Polyurethane (TPU) is a kind of thermoplastic elastomer with high resilience and melting processability, which can be molded by extrusion, injection molding, blow molding and calendaring. TPU has good mechanical characters, wear resistance, oil resistance and cold resistance as well as wide range application of hardness. Lubrizol Advanced Material who belongs to Lubrizol USA, is a world-leading manufacturer of polyester , special chemicals and chemical additives, their products are widely used in consumer and industry market. The TPU from Lubrizol will definitely provide you with ideal materials through unique processed Estane®, Pearlthane®, and Isoplast®.

ESTANE S100

ESTANE S300

ESTANE T300/T400

ESTANE R100

Application：

It can be used for outsole, watchband(shell),roller,non-skid chains,antenna,etc..

LUBRIZOL ESTANE S100

Test Item	Test Method	Unit	S175A	S180A	S185A	S190A	S195A	S198A	S160D	S168D
Hardness	ASTM D2240	Shore A	77	83	87	92	95	98	*	*
Hardness	ASTM D2240	Shore D	26	32	36	40	52	55	63	68
Specific density	ASTM D792	*	1.18	1.19	1.2	1.21	1.22	1.23	1.25	1.27
100% Tensile strength	ASTM D412	Kgf/cm²	35	45	65	95	130	160	220	280
300% Tensile strength		Kgf/cm²	65	90	120	190	280	300	350	400
Tensile strength		Kgf/cm²	300	350	400	500	550	500	450	450
Elongation @ Break		%	800	770	650	650	570	520	480	430
Tear strength	ASTM D624	Kgf/cm	80	90	110	140	150	180	230	250
Abrasion	ISO 4649	Mm³loss	40	30	30	30	30	25	25	25
Softening temperature	ASTM D1525	℃	84	85	95	110	130	143	158	163
Compressed Distortion @23℃ 22h	ASTM 395	%	15	15	15	15	15	20	20	20
Compressed Distortion @70℃ 22h	ASTM 395	%	30	35	35	40	40	40	45	45

Application:

It can be used for shoe accessories, air cushions, frog mirrors, zippers, pipes, etc.

LUBRIZOL ESTANE S300

Test Item	Test Method	Unit	S385A	S392A	S395A	S398A	S360D	SS364D	S368D	S375D
Hardness	ASTM D2240	Shore A	85	93	95	98	*	*	*	*
Hardness	ASTM D2240	Shore D	35	50	52	55	63	65	68	78
Specific Density	ASTM D792	*	1.19	1.21	1.22	1.22	1.25	1.25	1.27	1.28
100% Tensile Strength	ASTM D412	Kgf/cm²	55	100	140	200	220	240	260	330
300% Tensile Strength		Kgf/cm²	100	200	280	320	360	390	390	430
Tensile Strength		Kgf/cm²	350	450	470	430	430	440	450	450
Elongation @ Break		%	780	650	530	420	400	390	380	330
Tear Strength	ASTM D624	Kgf/cm	95	120	160	170	220	220	220	260
Abrasion	ISO 4649	Mm³loss	35	35	30	30	30	30	25	25
Softening Temperature	ASTM D1525	℃	62	110	115	116	120	123	125	130
Compressed Distortion @23℃ 22h	ASTM 395	%	15	15	15	20	20	20	25	35
Compressed Distortion @70℃ 22h	ASTM 395	%	45	45	45	45	40	40	40	40

LUBRIZOL ESTANE T300/T400

Test Item	Test Method	Unit	T365A	T370A	T460A	T465A	T470A
Hardness	ASTM D2240	Shore A	70	74	66	71	77
Specific Density	ASTM D792	*	1.05	1.06	1.12	1.13	1.13
100% Tensile Strength	ASTM D412	Kgf/cm²	26	32	22	30	40
300% Tensile Strength		Kgf/cm²	48	57	40	46	60
Tensile Strength		Kgf/cm²	350	250	200	220	280
Elongation @ Break		%	950	900	860	950	900
Tear Strength	ASTM D624	Kgf/cm	65	70	60	60	75
Mold Shrinkage ”	ASTM D955	Mm³loss	0.011	0.006	0.013	0.010	0.006
Softening Temperature	ASTM D1525	℃	67	70	75	75	77
Compressed Distortion @23℃ 22h	ASTM 395	%	10	10	10	10	10
Compressed Distortion @70℃ 22h	ASTM 395	%	30	30	30	30	35

Application:

It can be used for shoe accessories, insoles, elastics, etc.

Application:

It can be used for ABS brake cable, medical cable, wire and cable, fire hose, vacuum hose, oil tube, film, shale trachea, etc.

LUBRIZOL ESTANE R100

Test Item	Test Method	Unit	R180A	R185A	R190A	R195A	R198A
Hardness	ASTM D2240	Shore A	83	87	93	95	98
Hardness	ASTM D2240	Shore D	33	36	47	52	55
Specific Density	ASTM D792	*	1.08	1.10	1.11	1.13	1.14
100% Tensile Strength	ASTM D412	Kgf/cm²	50	60	100	115	150
300% Tensile Strength		Kgf/cm²	80	100	170	200	260
Tensile Strength		Kgf/cm²	250	320	370	425	440
Elongation @ Break		%	790	700	680	600	545
Tear Strength	ASTM D624	Kgf/cm	90	95	110	125	175
Abrasion	ISO 4649	Mm³loss	35	25	25	25	25
Softening Temperature	ASTM D1525	℃	82	90	110	125	125
Compressed Distortion @23℃ 22h	ASTM 395	%	15	15	15	15	20
Compressed Distortion @70℃ 22h	ASTM 395	%	45	45	45	45	45

LUBRIZOL ESTANE 2103

Test Item	Test Method	Unit	2103-70A	2103-80A	2103-84AEN	2103-90AE
Hardness	D2240	Shore	72A	82A	82A	90A/47D
Specific Density	D792	*	1.06	1.13	1.13	1.14
Tensile Strength	D412	Mpa	24.7	34.5	34.5	38.2
Elongation	D412	%	730	600	600	530
Tear Strength	D624	KN/m	66.5	105	105	133
Vicat Softening Temperature	D1525	℃	75	85	85	90
Tg	-	℃	-69	-40	-40	-34
Compressed Distortion @23℃ 22h	D395	%	25	30	30	25
Compressed Distortion @ 70℃ 22h	D395	%	75	33	33	40

Application:

It can be used for soccer soles, American soccer hobnails.

LUBRIZOL ESTANE BF

Test Item	Unit	Test Method	BF85	BF92
Grade			ester	ester
Hardness	Shore	ISO 868	85±3A	93±3A
Specific Density	g/cm³	ISO 2781	1.21	1.21
Tensile Dtrength	Mpa	ISO 37	30.8	35
Elongation @ Break	%		613	530
-50% Elongation	Mpa		5.0	8.8
-100% Elongation	Mpa		6.1	10.1
-300% Elongation	Mpa		8.0	17.6
Tear Resistant Strength	Kn/m	ISO 34	125	165
Abrasion	mm³	ISO 4649	72	56
Vicat Softening Point A50	℃	ISO 306	58	74
Coffler Melting Point	℃	-	122	152

Application:

It can be used for film, blowing film, outer layer of tarpaulins.

LUBRIZOL ESTANE 58000

Test Item	Unit	Test Method	58238	58206	58132	58137	58138
Grade			ester	ester	ester	ester	ester
Hardness	Shore	D2240	75A	85A	88A	67D	75D
Specific Density		D792	1.17	1.2	1.21	1.24	1.24
Tensile Strength	Psi	D412	7000	6500	5100	5400	7700
Elongation	%	D412	680	550	645	430	300
Compressed Distortion	%	D395	21	20	16	29	-
Tg	℉		-49	-26	-56	-8	-6
Vicat Temperature	℉	D1525	153	185	203	309	309
Flexural modulus	Psi	D790	-	4000	7500	60000	150000
Taber	mg,CS-17	D3389B	-	3	0.1	19	-

LUBRIZOL ESTANE 58000 2

Test Item	Unit	Test Method	58437	58134	58130	58141	58133	58149	58142
Grade			ether	ether	ether	ether	ether	ether	ether
Hardness	Shore	ISO 868	86A	88A	49D	49D	55D	96A/55D	60D
Specific Density	g/cm³	ISO 2781	1.18	1.2	1.2	1.21	1.21	1.21	1.23
Tensile Strength	Mpa	ISO 527	39	51	52	30	53	26	45
Elongation	Mpa	ISO 527	540	530	510	540	500	370	535
Compressed Distortion 70hrs @22℃	%	ISO 815	23	22	25	19	34	18	43
Compressed Distortion 24hrs @70℃	%	ISO 815	60	51	55	27	70	23	61
Tear Strength with notch	Kn/m	ISO 34-1B	60	85	95	80	125	114	165
Tear Strength without notch	Kn/m	ISO 34-1B	94	102	125	138	157	127	179
Abrasion Resistance	mm³	ISO 4649	35	35	30	45	35	40	30
Resilience	%	ISO4662	37	40	35	35	29	27	36
Vicat Softening Point	℃	ISO 306	75	91	104	135	116	146	428

LUBRIZOL ESTANE 58000 3

Test Item	Unit	Test Method	58881	58309	58863	58202	58887	58810	58211
Grade			ether	ether	ether	ether	ether	ether	ether
Hardness	Shore	D2240	80A	85A	85A	85A	87A	90A/2D	90A/49D
Specific Density		D792	1.1	1.13	1.12	1.25	1.12	1.13	1.29
Tensile Strength	Psi	D412	3400	6500	5900	4000	7000	5550	4050
Elongation	%	D412	710	570	600	650	490	525	340
Tensile Test	%	D412	10	21	25	17	21	25	53
Compressed Distortion	%	D395	18	22	20	25	23	25	37
Tg	℉		-61	-51	-58	-49	-51	-47	-36
Vicat Temperature	℉	D1525	154	205	208	154	201	230	194
Flexural Modulus	Psi	D790	2480	4200	5840	6110	6190	5470	-
Taber	mg,CS-17	D3389B	3	3	4.5	5	5	5	2

LUBRIZOL ESTANE 58000 4

Test Item	Unit	Test Method	58280	58300	58315	58214	58311	58887	58212	58144	58125
Grade			ether	ether	ether	ether	ether	ether	ether	ether	ether
Hardness	Shore	ISO 868	78A	83A	85A	85A	87A	88A	94A/42D	60D	A/1: 77
Specific Density		ISO 2781	1.06	1.13	1.12	1.11	1.12	1.13	1.15	1.17	1.07
Elastic Modulus	Mpa	ISO 527	11	15	23	20	21	29	56	210	22
Tensile Strength	Mpa	ISO 527	29	28	37	35	42	42	36	44	-
Elongation	%	ISO 527	720	725	650	650	655	600	530	410	775
Compressed Distortion 70hrs@22℃	%	ISO 815	16	32	27	27	27	28	30	36	-
Compressed Distortion 24hrs@70℃	%	ISO 815	40	70	70	70	70	68	70	60	-
Tear Resistance with notch	Kn/m		50	50	55	55	55	65	95	160	30
Abrasion Resistance	mm3	ISO 4649	30	70	35	45	35	40	40	50	30
Resilience	%	ISO4662	72	50	40	40	40	40	25	34	-
Vicat Softening Point	℃	ISO 306	-	60	73	67	73	79	80	105	66

Application:

It can be used for waterproof lining, shoes, sails, water polo, halogen flame retardant wire, overmolding, health bracelet, etc..

Test Item	Unit	Test Method	Representative value
Hardness	Shore A/D	ISO 868	95
Specific Density	g/cm³	ISO 2781	1.17
Tensile Strength	Mpa（PSI）	ISO 527-2/5A/500	36（5221）
Elongation @ Break	%	ISO 527-2/5A/500	415
50% Tensile Strength	MPa	ISO 527-2/5A/500	10
100% Tensile Strength	Mpa（PSI）	ISO 527-2/5A/500	12（1740）
300% Tensile Strength	Mpa（PSI）	ISO 527-2/5A/500	28（4061）
Tear Strength	Kn/m	ISO 34-1B	142（811）
Abrasion	mm³	ISO 4649-ASO 527-2/1A/5	28
Softening Temperature	℃	ISO 306(A50)	107
Compressed Distortion 100℃,22h	%	ASTM D395B	*
Compressed Distortion 70℃,70h	%	ASTM D395B	*
Compressed Distortion 70℃,22h	%	ASTM D395B	*

Application:

It can be used for soccer soles, cell phone protection case, etc.

Application:

Oil water separator, oil sac, oil bag, fuel filter housing/cover, printer components, water pump accessories, etc..

ISOPLAST ETP

Test Item	Unit	Test Method	101 ETP	101 LGF40 NAT ETP	101 LGF60BLK ETP	202 LGF40 NAT ETP	202EZ ETP	301 ETPU 01	302EZ ETP
Gardiner 60°Gloss	%	ASTM D823	100	-	-	-	-	-	-
Mold Shrinkage	In/in	ASTM D 955	0.004-0.006	0.001	0.001	0.001	0.004-0.006	0.004-0.006	0.004-0.006
Hygroscopicity,24h,73ºF(23ºC)	%	ASTM D 570	0.17	-	-	-	-	1.19	-
Specific Density		ASTM D 792	1.19	1.51	1.71	1.50	1.20	1.20	1.20
Tensile Strength @Yield	psi	ASTM D 638	7,000	27,000	26,000	27,000	10,000	10,000	12,000
Tensile Strength @Break	psi	ASTM D 638	7,000	27,000	26,000	27,000	9,000	9,000	10,000
Elongation @Yield	%	ASTM D 638	6	2	1.6	1.8	9	7	9
Elongation @Break	%	ASTM D 638	160	2	1.6	1.8	90	140	90
Tensile Modulus	psi	ASTM D 638	220,000	1,700,000	2,300,000	1,700,000	260,000	310,000	280,000
Flexural Strength	psi	ASTM D 790	9,900	45,000	46,000	49,000	13,000	14,000	14,000
Flexural Modulus	psi	ASTM D 790	260,000	1,500,000	2,100,000	5,500,000	320,000	340,000	330,000
notch,1/8inch(3.2mm),73ºF(23ºC)	ft-lb/in	ASTM D 256	24	8	12	5	10	2.4	2
Notch,1/8inch(3.2mm),-40ºF(-40ºC)	ft-lb/in		3	8	-	-	3	0.8	1.1
Notch,¼”(6.4mm),73°F (23°C)	ft-lb/in		21	-	-	-	-	1.7	-
Total Energy, 73ºF (23ºC)	In-lb	ASTM D 3763	600	270	-	150	400	800	600
Total Energy, -20ºF(-29º)	In-lb	ASTM D 3763	600	150	-	120	300	800	-
RScale		ASTM D 785	116	-	-	-	-	123	124
MScale		ASTM D 785	-	-	-	-	-	74	92
66psi (0.45 MPa)，Unannealed	°F	ASTM D 648	160	-	-	330	260	190	270
66 psi (0.45 MPa)，Annealed	°F		180	-	-	-	290	220	290
264 psi (1.8 MPa)， Unannealed	°F		140	200	260	290	240	170	240
264 psi (1.8 MPa)，Annealed	°F		170	210	260	-	280	210	280
Vicat Softening Temperature	°F	ASTM D 1525	192	366	366	-	292	228	297
Linear Thermal Expansion Coefficient	10-5 in/in/oF	ASTM D 696	4.5	0.8	0.6	0.4	3.7	3.4	3.2
Optical Transmission	%	ASTM D 1003	-	-	-	-	-	90	88
Yellowness Index	%	ASTM D 1925	-	-	-	-	-	6	40
Recommended Drying Temperature	°F	-	185-195	180-210	180-210	260-280	260-280	200-230	260-280
Recommended Melting Temperature	°F	-	430-470	460-500	460-500	450-500	460-500	450-480	460-500
Recommended Mold Temperature	°F	-	150-180	150-190	150-190	200-250	200-250	150-200	200-250

Test Item	Unit	Test Method	300 ETPU
Gardiner 60°Gloss	g/cm3	ISO 1183	1.21
Mold Shrinkage	%	ASTM D 955	0.5 –0.6
Hygroscopicity,24h,73ºF(23ºC)	%	ASTM D 570	0.15
Hardness(1S)	Shore D	ISO 868	83
Flexural Strength	MPa	ISO 178	85
Flexural Modulus	MPa	ISO 178	1980
E-modulus	MPa	ISO 527-2/1A/1	2130
Elongation @ Yield	MPa	ISO 527-2/1A/5	63
Elongation @ Break	MPa	ISO 527-2/1A/5	64
Notch,23°C	%	ISO 527-2/1A/5	7
切口,-30°C Notch,30°C	%	ISO 527-2/1A/5	7
Glass Transition Temperature (Tg)	℃	DSC	90
Method A (1.80 MPa)	℃	ISO 75	69
Method B (0.45 MPa)	℃	ISO 75	79
Vicat Softening Temperature	℃	ISO 360 (A50)	96
Linear Thermal Expansion Coefficient	10-5mm/mm/°C	ASTM D 696	-
Optical Transmission	%	ASTM D 1003	92
Yellowness Index	-	ASTM D 1925	15

Application:

Animal ear tag, Disney wristband, car interior parts, high-grade car invisible car clothing, scratch resistant mobile phone film, bulletproof glass interlayer

Test Item	Test Method	Unit	D91T80	D91T86	91F88	91F57D	91F65D	91T85
Hardness（3S）	ISO868/ ASTM D-2240	ShoreA	A/3: 81	A/3: 88	A/3: 90	D/3: 57	D/3: 65	A/3: 88
Specific Density	ISO2781/ ASTM D-792	g/cm³	1.11	1.12	1.13	1.15	1.11	1.11
Tensile Strength	ISO527-2/ASTM D-412	MPa(psi)	25.3 (3669)	34(4931)	40-45	60-65	34-37	25 (3626)
Ultimate Elongation	ISO527-2/ASTM D-412	%	800	700	500-550	375-425	250-300	650
Tensile strength @ 100%	ISO527-2/ASTM D-412	MPa(psi)	4.3(624)	6 (870)	7-9	13-15	20-22	5 (725)
Tensile strength @ 300%	ISO527-2/ASTM D-412	MPa(psi)	7.5(1088)	9(1305)	18-21	40-43	34-37	9 (1305)
Abrasion	ISO 4649	mm³	30	20	35	-	-	30
Tear Strength	ISO 34-1B (ASTM D-624 Die C)	kN/m(lb/in)	80 (457)	110 (628)	-	-	-	91 (520)
Vicat Softening Point A50A50	ISO 306	ºC (ºF)	60 (140)	86(359)	-	-	-	85 (185)
Haze（2mm)	ASTM 1003	%	23	25	-	-	-	-
Moisture Content	MQSA 44	%	< 0.1	< 0.1	< 0.1	< 0.1	< 0.1	< 0.1

Test Item	Test Method	Unit	AG_4950	AG_8451
Ultimate Tensile Strength	D412	psi	3500	7000
Ultimate Elongation	D412	%	770	475
Tensile Modulus @100%	D412	psi	340	500
Tensile Modulus @200%	D412	psi	475	1200
Tensile Modulus @300%	D412	psi	650	2000
Specific Density	D792	-	1.06	1.08
DSCMiddle，Tg	Lubrizol DSC	°C	-60	-60
TMA Peak	Lubrizol TMA	°C	92	88
TMA Range	Lubrizol TMA	°C	60-140	65-130
Thermal Expansion Coefficient	Lubrizol CTE-TMA Method	°C	~0.0003	~0.0002
Haze	D1003	%	0.3	0 to 0.3
Transmission	D1003	%	90	85 to 95
Yellowness Index	D1925	-	<1	<1
Refractive Index	D542-95	-	1.486	1.4962